YJ Wrangler Spring-Over Conversion Kit

The Rubicon spring-over conversion kit gives you the components necessary to move the leaf spring perch to the top of the axle, increasing lift and flexibility. Spring-over axle lifts retain a stock-type ride quality by retaining the original leaf spring. Installation of this kit encompasses removing the original spring perches, welding of new perches, and other adjustments. A CV-type driveshaft is recommended for this application.

Net lift from the conversion is minimum 5.5-inches. For greater durability, and a total of 7-inches of lift, we recommend running RE1445 & RE1444 Extreme-Duty leaf Springs.

NOTE:
Steering modifications are needed on a spring over conversion. Such as a Tera high steer kit (TERHSK)

Components
RE1513 ~ BRAKE LINE SS REAR 22"
RE1555 ~ BRAKE LINE SET SS FRONT 28"
RE1630 ~ TRACK BAR BRACKET, YJ FRONT LO
RE1920 ~ ANTIWRAP SPRING PERCH 2.5" OFF
RE1930 ~ ANTIWRAP SPRING PERCH 2.5"/PA
RE2000 ~ SHOCK ADAPTER BRACKET W/HARDWA
RE2100 ~ T-CASE LOWERING KIT YJ/TJ 1"
RE2500 ~ PITMAN ARM YJ/TJ/XJ POWER STEE